つのちゃん 洋白 | Tsuno-chan Dinosaur Mini LED Robot (Nickel Silver)
JPY11,000(USD69.38)
残り1点
International shipping available
いもゆで工房製造の人気へんてこロボに初の恐竜型タイプが登場!
LED内蔵の洋白製ミニロボットです。
底面のスライドスイッチで頭部が光ります。
手足は付け根から可動し、ポーズがある程度つけられます。
顎のヒンジで頭部が可動、口が開きます。
角は牛骨を利用。
右手に2mm程度の太さのものなら持たせることが出来ます。
何とも言えない可愛さをあなたのお手元に是非。
電池交換はおなかのマイナスねじを取り外し、
底部を開いて電池ボックスを取り出して行います。
連続点灯時間は8時間程度です。
デザイン上大変尖った箇所が存在します。お取り扱いにはご注意ください。
お子様の手の届く範囲に置かないようお気を付けください。
【素材】洋白(ニッケル、銅、亜鉛の合金)銀色で500円玉と同じ素材
【サイズ】全長32mm×20mm×40mm
【電池】ボタン電池、 LED内蔵(ウォームホワイト SR626電池2個使用)
【作家紹介】いもゆで工房
ハンドメイドでボールペン、シャープペンシルなどを作ってます。
洋白、真鍮、各種銘木、角などを組み合わせ、旋盤による削り出しです。
一点ずつボリューム、サイズも違います。
ピューター小物も自宅鋳造ですので一点ずつ微妙に風合いが違いますのでご了承ください。
--- English ---
Tsuno-chan Dinosaur Mini LED Robot (Nickel Silver)
He is the first dinosaur the workshop has made, and he knows it.
His horn is cow bone. His jaw opens on a hinge, his arms and legs move at the joints, and his right hand will hold anything about 2 mm thick.
Slide the switch underneath and his head lights up warm white, for about eight hours at a stretch.
He spends his evenings on your desk, holding a pin, waiting to be asked what it is for.
Material: Nickel silver (an alloy of nickel, copper and zinc); horn: cow bone
Size: 32 x 20 x 40 mm
Light: Built-in LED (warm white), two SR626 button cells, about 8 hours of continuous light
Each piece differs slightly in size and volume.
Brand: Imoyude Kobo. Pens and small pieces, lathe-turned from metal, wood and horn.
To change the batteries, remove the flat-head screw on the belly, open the base and take out the battery box. Some parts are very pointed, so handle with care. Keep out of reach of children.
-
レビュー
(0)
JPY11,000 (USD69.38)
